Dual-SIM transit router for vehicle connectivity
Rugged, outdoor-ready dual-SIM 4G router designed to deliver high-speed wireless hotspots and active-active bandwidth aggregation inside trains, buses, and public transport.
Explore the MX-720AC from every angle
The MX-720AC is a high-speed vehicle access point and router featuring a robust metallic casing, dual SIM slots, and multiple external high-gain antennas. Explore the device below.
High-speed dual SIM routers, designed for transit environments.
Establishing a connection between core and edge networks can be challenging when deploying cabled infrastructure in public transit. Wireless backhauling with LTE support solves this by utilizing LTE-powered access points to create robust wireless mesh networks inside trains, cars, or buses.
With integrated dual modems operating in active-active load balancing, the MX-720AC provides twice the throughput, ensuring smooth browsing experiences, captive portal logins, and telemetry tracking for passenger transit fleets.
Product Features
Technical Specifications
| Wireless Standard | Wi-Fi 5 (802.11a/b/g/n/ac) |
|---|---|
| Radios | 2.4GHz: 802.11b/g/n | 5GHz: 802.11a/n/ac |
| AP Throughput | 1200 Mbps |
| Antenna Type | Internal MIMO antenna, Two 5dBi 2.4GHz and Two 5dBi 5GHz |
| Radio Operation Modes | Wi-Fi Access Point, Gateway, Local Meshing |
| SIM Card Slots | 2x SIM card slots (Supports Dual SIM active-active bandwidth aggregation) |
|---|---|
| Ethernet WAN | 1x 10/100/1000Mbps RJ45 WAN Port |
| Ethernet LAN | 1x 10/100Mbps RJ45 LAN Port |
| Reset Button | 1x Reset button (press 15 seconds to revert to factory setting) |
| Dimensions | 198mm X 28mm |
| Enclosure Protection | IP-65 Rugged Casing |
| Power Input | DC IN: 12V/1.5A or PoE IN: 48V/0.5A |
|---|---|
| PoE Compliance | IEEE 802.3af/802.3at PoE compliant for Gigabit Ethernet |
| AP Operation Modes | Cloud managed, Autonomous |
| Wi-Fi Certification | a/b/g/n/ac Wi-Fi certified |
| Environmental Parameters | Operating Temp: 0°C to 50°C (32°F to 122°F) | Operating Humidity: 5% to 95% noncondensing |
Interactive Interfaces Explorer
Select a product layout and hover over or click the pulsing hotspots on the diagram to explore the physical ports, buttons, and antenna configurations.
Screw-on SMA connectors for cellular antennas, supporting MIMO carrier aggregation for primary cell module link connectivity.
Threaded, vibration-resistant DC power input terminal (12V). Designed for secure, uninterrupted wiring into transit power systems.
Two RJ45 LAN ports for local vehicular devices like ticket validators, security cameras, and fleet screens.
1x 10/100/1000Mbps Ethernet WAN port for primary broadband backhaul or external high-speed satellite connectivity.
Recessed micro-switch. Restores default firmware parameters when pressed and held for 15 seconds.
SMA female connector for external active GPS antenna, essential for transit location tracking and vehicular telematics.
Four SMA antenna ports (2x 2.4GHz, 2x 5GHz) to broadcast high-speed passenger hotspots inside buses and trains.
Secondary cellular SMA ports to support dual-SIM active-active modem aggregation for bandwidth balancing.
Two SMA ports for high-gain 5GHz antennas, optimizing wireless performance and throughput for dense local client environments.
Standard 12V/1.5A DC barrel socket, ideal for desktop usage or indoor enclosure mounting scenarios.
Recessed micro-switch to restore factory default configuration profile settings.
Two 10/100/1000Mbps Ethernet WAN ports supporting redundancy, active WAN failover, and hardware load balancing.
Three RJ45 LAN ports to wire local networking accessories, PoE expanders, or high-definition on-board media servers.
Two SMA ports for 2.4GHz antennas, providing extended range and coverage radius for passenger hotspot connections.
Explore More 4G/5G Routers
Discover other cellular routers optimized for vehicular transport, dual-SIM resilience, and active bandwidth aggregation.
EXPLORE ROUTERS